Black hole to ‘eat biggest meal’ https://www.bbc.co.uk/news/world-middle-east-25678737
Category: AQA Unit 5D Turning Points
Jan 11 2014
Permanent link to this article: https://www.animatedscience.co.uk/2014/black-hole-to-eat-biggest-meal
Permanent link to this article: https://www.animatedscience.co.uk/2011/exam-past-papers-unit-5-5d
Jan 30 2011
The story of cathode rays begins in 1855. In that year, Heinrich Geissler invented the mercury vacuum pump. With the pump he could remove almost all of the air from a sealed glass tube. Geissler’s friend Julius Plucker used the pump to evacuate a special kind of tube. Inside the tube were two electrodes. Plucker attached one electrode, called the anode, to the positive terminal of a battery. He attached the other electrode, the cathode, to the negative terminal. He noticed that the glass near the cathode glowed with greenish light. When Plucker held a magnet near the tube, the glowing spot moved. Plucker’s student, Johann Wilhelm Hittorf, put solid objects inside the tube between the cathode and the glow. The objects cast shadows. Hittorf concluded that the cathode was emitting something that travelled in straight lines, like light rays. The German physicist Eugen Goldstein named them “cathode rays.”
The English scientist William Crookes thought cathode rays were streams of molecules that had picked up a negative electric charge. Crookes knew from the laws of electricity and magnetism that a charged particle in a magnetic field would move in a circle. Since a magnetic field caused cathode rays to move in a circle, Crookes reasoned, they must be made of charged particles.
If cathode rays were streams of charged particles, an electric field also should have deflected their path. The German physicist Heinrich Hertz tested this hypothesis. He set a cathode ray tube between two metal plates. One plate was positively charged and the other was negatively charged. Negatively charged molecules should have been attracted to the positive plate. When Hertz connected his tube to the battery, the cathode rays kept going in a straight line. Hertz concluded that the cathode rays were a new kind of electromagnetic wave. Hertz’s student, Philipp Lenard, designed a cathode ray tube with a thin foil at one end. The cathode rays went right through the foil. Since molecules of gas could not go through the foil, Lenard knew that cathode rays could not be charged molecules. He agreed with his teacher that they must be electromagnetic waves.
Then Jean-Baptiste Perrin conducted a very simple but very clever experiment. He accelerated a beam of electrons in a glass tube. You can see at the start of my video how the spot on the glass tube is the impact of the electrons causing fluorescent on paint on the inside of the tube. He then setup a magnetic field at 90 degrees to the beam using coils of wire (Helmholz coils). As you increase the current flow inside the coils the field becomes stronger causing the beam to curve according to Flemings LH rule of FBI. Now as the beam is directed down to a collector which is connected to a gold leaf electroscope the leaf rises. This shows us that the beam is in fact charged. Further experiments show the charge is also negative. This is evidence that cathode rays are in not part of the EM Spectrum.
[hana-flv-player video=”https://www.animatedscience.co.uk/wp-content/uploads/2011/01/charged-electron.flv” width=”400″ height=”330″ description=”Charged Electron” player=”4″ autoload=”true” autoplay=”false” loop=”false” autorewind=”true” /]
Permanent link to this article: https://www.animatedscience.co.uk/2011/the-electron-a-charged-particle
Here is a 1st test version of my Atomic Physics software for A-Level students. This one is a rough version to test online which has the following features…
1) Historic rotating time line of the Scientists which did a lot of discoveries in the field of Atomic Physics. You can download images to make a worksheet or your own poster. Also you can copy text from animation. I will be upgrading this soon to have animations / images in the space below the information text which change when you click.
2) A series of video clips in FLV format with menu from Dr Brian Cox about particle physics. I will be upgrading this soon so video player will resize to fill larger area on click.
At the moment it is online only so the fullscreen button does not work. However, I will make an MSI when I have finished it so you can download to your local PC. Any suggestions welcome….
Permanent link to this article: https://www.animatedscience.co.uk/atomic-physics-2
Dec 01 2010
3-D invisibility cloak hides gold “bump” The first device to hide an object in three dimensions has been unveiled by a group of physicists in the UK and Germany. While the design only cloaks micro-scale objects from near-infrared wavelengths, the researchers claim that there is nothing in principle to prevent their design from being scaled up to hide much larger artefacts from visible light. The origins of this design date back to 2006, when David Smith and colleagues at Duke University in North Carolina created a cloak that could bend microwaves around an object, like water flowing around a smooth stone.
This early cloak was made using a metamaterial – an artificially constructed material with unusual electromagnetic or other properties – which consisted of a cylinder built up from concentric rings of copper split-ring resonators. This first cloak, however, only worked in two dimensions – in other words, looking at the cylinder from above revealed the presence of the shielded object.
Carpet cloak Now Tolga Ergin and colleagues at Karlsruhe Institute of Technology in Germany, together with John Pendry of Imperial College in London, have overcome this problem by creating a “carpet cloak”. Proposed in 2008 by Pendry and Jensen Li, this involves hiding an object underneath a bump on the surface of an otherwise smooth material – just as something might be hidden under a carpet – and then smoothing out the resulting bump. This is achieved by creating a bump on a flat mirror and then placing onto the mirror a layer of metamaterial with optical properties such that light appears to reflect off the mirror as if the bump were not there. This technique was demonstrated experimentally at two different wavelengths last year, with Smith’s group showing that it worked in the microwave region while researchers at Berkeley and Cornell University near New York obtained similar results at infrared wavelengths. However, these cloaks were also limited to just two dimensions.
Ergin’s group has made a carpet cloak in three dimensions by stacking nanofabricated silicon wafers on top of one another in a “woodpile” matrix and then filling in the gaps between the wafers with varying amounts of polymer. This achieves the desired distribution of refractive indices within the structure. Hiding the bump The cloak structure was then placed on top of a reflective gold surface containing a bump, leading to a cloaking effect using unpolarized light with wavelengths between 1.4 and 2.7 µm – the near-infrared. Importantly, this effect held for viewing angles up to 60 degrees (with zero degrees representing viewing in just two dimensions).
The bump, however, was very small – just 30 µm (10–6 m) × 10 µm × 1 µm. Team member Martin Wegener says it should be possible to use existing technology to make the cloak bigger in order to hide larger objects, but that this approach would be extremely time-consuming. “Faster nanofabrication tools will have to be developed allowing for three-dimensional structures,” he adds. For Wegener the aim of the work is not about focusing all efforts on creating invisibility cloaks, but is about exploring a range of applications in transformation optics.
This involves calculating what kind of material is needed to bend light in a certain way, by considering light trajectories as the result of the warping of space. Wegener says that transformation optics should lead, for example, to the design of better antennas or smaller optical resonators. Smith describes the latest work as “very exciting” and agrees that its real importance lies in the development of transformation optics. “Demonstrations like these are paving the way for transformation optical design to become an established design methodology, like ray-tracing,” he says. The research is published in Science.
Permanent link to this article: https://www.animatedscience.co.uk/2010/3d-invisibility-cloak-unveiled